- |
SIMATIC DP, ELECTRONIC MODULES FOR ET200PRO 4 AI RTD HIGH FEATURE, PT100; PT200; PT500; PT1000; NI100; NI200; NI500; NI1000; CHANNEL DIANOSTICS; INCLUSIVE BUS MODULE, CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY |
|
| Supply voltage |
| Load voltage L+ |
| Rated value (DC) |
24 V |
| Reverse polarity protection |
Yes; against destruction |
| Input current |
| from backplane bus 3.3 V DC, max. |
10 mA; Typical |
| Power losses |
| Power loss, typ. |
0.7 W |
| Address area |
| Address space per module |
| Address space per module, max. |
8 byte |
| Analog inputs |
| Number of analog inputs |
4 |
| Cycle time (all channels) max. |
83 ms; 83 ms at 50 Hz; 69 ms at 60 Hz |
| Technical unit for temperature measurement adjustable |
Yes |
| Input ranges |
| Voltage |
No |
| Current |
No |
| Thermocouple |
No |
| Resistance thermometer |
Yes |
| Resistance |
Yes |
| Input ranges (rated values), resistance thermometers |
| Cu 10 |
No |
| Ni 100 |
Yes |
| Input resistance (Ni 100) |
10000 kΩ |
| Ni 1000 |
Yes |
| Input resistance (Ni 1000) |
10000 kΩ |
| Ni 120 |
Yes |
| Input resistance (Ni 120) |
10000 kΩ |
| Ni 200 |
Yes |
| Input resistance (Ni 200) |
10000 kΩ |
| Ni 500 |
Yes |
| Input resistance (Ni 500) |
10000 kΩ |
| Pt 100 |
Yes |
| Input resistance (Pt 100) |
10000 kΩ |
| Pt 1000 |
Yes |
| Input resistance (Pt 1000) |
10000 kΩ |
| Pt 200 |
Yes |
| Input resistance (Pt 200) |
10000 kΩ |
| Pt 500 |
Yes |
| Input resistance (Pt 500) |
10000 kΩ |
| Input ranges (rated values), resistors |
| 0 to 150 ohms |
Yes |
| Input resistance (0 to 150 ohms) |
10000 kΩ |
| 0 to 300 ohms |
Yes |
| Input resistance (0 to 300 ohms) |
10000 kΩ |
| 0 to 600 ohms |
Yes |
| Input resistance (0 to 600 ohms) |
10000 kΩ |
| 0 to 3000 ohms |
Yes |
| Input resistance (0 to 3000 ohms) |
10000 kΩ |
| Resistance thermometer (RTD) |
| Characteristic linearization |
| for resistance thermometer |
Ptxxx, Nixxx |
| Characteristic linearization |
| Parameterizable |
Yes |
| Cable length |
| Cable length, shielded, max. |
30 m |
| Analog value creation |
| Measurement principle |
integrating |
| Integrations and conversion time/resolution per channel |
| Resolution with overrange (bit including sign), max. |
15 bit |
| Integration time, ms |
20 / 16,667 |
| Interference voltage suppression for interference frequency f1 in Hz |
50 / 60 Hz |
| Conversion time (per channel) |
20.625 ms; 20.625 ms at 50 Hz; 17.25 ms at 60 Hz |
| Smoothing of measured values |
| Parameterizable |
Yes |
| Step: None |
Yes; 1 x cycle time |
| Step: low |
Yes; 4 x cycle time |
| Step: Medium |
Yes; 16 x cycle time |
| Step: High |
Yes; 64 x cycle time |
| Encoder |
| Connection of signal encoders |
| for resistance measurement with two-wire connection |
Yes; Line resistances are also measured |
| for resistance measurement with three-wire connection |
Yes |
| for resistance measurement with four-wire connection |
Yes |
| Errors/accuracies |
| Linearity error (relative to input range), (+/-) |
0.05 % |
| Temperature error (relative to input range), (+/-) |
0.0020 %/K |
| Crosstalk between the inputs, min. |
-50 dB |
| Repeat accuracy in steady state at 25 °C (relative to input area), (+/-) |
0.015 % |
| Operational limit in overall temperature range |
| Resistance thermometer, relative to input area, (+/-) |
0.175 % |
| Basic error limit (operational limit at 25 °C) |
| Resistance thermometer, relative to input area, (+/-) |
0.125 % |
| Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency |
| Series mode interference (peak value of interference < rated value of input range), min. |
50 dB |
| common mode voltage (USS < 2.5 V) , min. |
70 dB; Interference voltage < 5 V |
| Interrupts/diagnostics/status information |
| Diagnostic messages |
| Wire break |
Yes |
| Group error |
Yes |
| Overflow/underflow |
Yes |
| Diagnostics indication LED |
| Group error SF (red) |
Yes |
| Parameter |
| Diagnosis: wire break |
Yes |
| Load voltage |
No |
| Measurement type/range |
R4L / R3L / R2L/ TR4L / TR3L / TR2L |
| Interference frequency suppression |
50 / 60 Hz |
| Group diagnostics |
Yes |
| Overflow/underflow |
Yes |
| Unit |
Degrees C / Degrees F |
| Galvanic isolation |
| Galvanic isolation analog inputs |
| between the channels |
No |
| between the channels and the backplane bus |
Yes |
| Permissible potential difference |
| between the inputs (UCM) |
5 Vpp AC |
| between MANA and M internally (UISO) |
500 V DC |
| Isolation |
| Isolation checked with |
500 V DC |
| Dimensions |
| Width |
45 mm |
| Height |
130 mm |
| Depth |
35 mm |
| Weights |
| Weight, approx. |
150 g |
| Status |
Jun 16, 2014 |
