- |
SIMATIC DP, ELECTRONIC MODULES FOR ET200PRO 4 AO I HIGH FEATURE, +-20MA; 0...20MA; 4-20MA; CHANNEL DIAGNOSTICS; INCLUSIVE BUS MODULE CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY |
|
| Supply voltage |
| Load voltage L+ |
| Rated value (DC) |
24 V |
| Reverse polarity protection |
Yes |
| Input current |
| from backplane bus 3.3 V DC, max. |
10 mA |
| Address area |
| Address space per module |
| Address space per module, max. |
8 byte |
| Analog outputs |
| Number of analog outputs |
4 |
| Voltage output, short-circuit protection |
Yes |
| Current output, no-load voltage, max. |
16 V |
| Cycle time (all channels) max. |
3 ms |
| Output ranges, current |
| 0 to 20 mA |
Yes |
| -20 to +20 mA |
Yes |
| 4 to 20 mA |
Yes |
| Connection of actuators |
| for current output two-wire connection |
Yes |
| for current output four-wire connection |
Yes |
| Load impedance (in rated range of output) |
| with current outputs, max. |
600 Ω |
| with current outputs, inductive load, max. |
1 mH |
| Destruction limits against externally applied voltages and currents |
| Current, max. |
100 mA |
| Cable length |
| Cable length, shielded, max. |
30 m |
| Analog value creation |
| Integrations and conversion time/resolution per channel |
| Resolution with overrange (bit including sign), max. |
15 bit; at +/- 20 mA; 14 bits at 0 to 20 mA; 15 bits at 4 to 20 mA |
| Conversion time (per channel) |
0.7 ms |
| Settling time |
| for resistive load |
0.1 ms |
| for inductive load |
1 ms |
| Errors/accuracies |
| Output ripple (based on output area, bandwidth 0 to 50 kHz), (+/-) |
0.02 % |
| Linearity error (relative to output range), (+/-) |
0.1 % |
| Temperature error (relative to output range), (+/-) |
0.01 %/K |
| Repeat accuracy in steady state at 25 °C (relative to output area), (+/-) |
0.05 % |
| Operational limit in overall temperature range |
| Current, relative to output area, (+/-) |
0.2 % |
| Basic error limit (operational limit at 25 °C) |
| Current, relative to output area, (+/-) |
0.15 % |
| Interrupts/diagnostics/status information |
| Substitute values connectable |
Yes |
| Alarms |
| Diagnostic alarm |
Yes; Parameterizable |
| Hardware interrupt |
No |
| Diagnostic messages |
| Wire break |
Yes; per channel, not in zero range |
| Diagnostics indication LED |
| Group error SF (red) |
Yes |
| Parameter |
| Output type/range |
1 |
| Diagnosis: wire break |
1 |
| Diagnosis: short circuit |
Encoder supply to M |
| Group diagnostics |
1 |
| Behavior on CPU/Master STOP |
1 |
| Galvanic isolation |
| Galvanic isolation analog outputs |
| between the channels |
No |
| between the channels and the backplane bus |
Yes |
| Dimensions |
| Width |
45 mm |
| Height |
130 mm |
| Depth |
35 mm |
| Weights |
| Weight, approx. |
150 g |
| Status |
May 26, 2014 |
